Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

Synthesis,crystal structure and magnetic properties of a new tri‐nuclear iron (II,III) complex,a precursor for the preparation of superparamagnetic Fe3O4 nanoparticles applicable in the removal of Cd2+

This study reports the structural and spectroscopic characterization of a novel metal organic compound formulated as [Fe (bpy)₃] [Fe (dipic)₂]₂.7H₂O ( 1 ) (dipic = pyridine‐2,6‐dicarboxylate and bpy = 2,2^′‐bipyridine). 1 was investigated by elemental analysis, FT‐IR spectroscopy, powder X‐ray diffraction and single crystal X‐ray diffraction (SC‐XRD), which revealed a triclinic structure of expected composition. Thermal degradation of 1 was also investigated. Complex 1 was used as a precursor to prepare superparamagnetic nanoparticles of Fe₃O₄ by thermal analysis. The obtained Fe₃O₄ was characterized by Fourier transformed infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD) and scanning electron microscopy (SEM). Fe₃O₄ nanoparticles were used as a nano‐adsorbent to remove Cd²⁺ from water at room temperature. The results showed that this nano‐adsorbent is effective in removing Cd²⁺ from contaminated water sources, and that the maximal effectivity of adsorption occurs at pH = 6. Magnetic measurements of complex 1 and Fe₃O₄ nanoparticles at room temperature revealed paramagnetic and superparamagnetic behavior, respectively.     

Freestanding Carbon Nanotube Film for Flexible Straplike Lithium/Sulfur Batteries

Flexible lithium/sulfur (Li/S) batteries are promising to meet the emerging power demand for flexible electronic devices. The key challenge for a flexible Li/S battery is to design a cathode with excellent electrochemical performance and mechanical flexibility. In this work, a flexible strap-like Li/S battery based on a S@carbon nanotube/Pt@carbon nanotube hybrid film cathode was designed. It delivers a specific capacity of 1145 mAh g⁻¹ at the first cycle and retains a specific capacity of 822 mAh g⁻¹ after 100 cycles. Moreover, the flexible Li/S battery retains stabile specific capacity and Coulombic efficiency even under severe bending conditions. As a demonstration of practical applications, an LED array is shown stably powered by the flexible Li/S battery under flattened and bent states. We also use the strap-like flexible Li/S battery as a real strap for a watch, which at the same time provides a reliable power supply to the watch.     

溶剂去除速度对于溶剂退火薄膜相形貌的影响

以聚苯乙烯-聚4-乙烯基吡啶(PS-b-P4VP)嵌段共聚物作为研究对象,采用DMF作为退火溶剂,以原子力显微镜(AFM)和透射电子显微镜(TEM)为表征手段,研究了溶剂退火后期溶胀薄膜中溶剂的去除速度对于薄膜相形貌的影响,发现通过改变溶剂去除速度可以有效的调控薄膜中的形貌.当薄膜厚度为35 nm时,DMF的快速挥发会导致薄膜中形成以PS为分散相的反转柱状相结构,当降低溶剂的挥发速度时,薄膜中形成了以PS为分散相的环状形貌,当进一步减缓挥发速度时,薄膜中将形成台阶状的片层结构;然而当薄膜厚度为55 nm时,溶剂退火后期薄膜中形成的是以P4VP为分散相的正常柱状相结构,在相同溶剂去除速度条件下薄膜相形貌变化较小.     

Dual‐Functional Semithiobambusurils

Semithiobambusurils, which represent a new family of macrocyclic host molecules, have been prepared by a convenient, scalable synthesis. These new cavitands are double functional: they strongly bind a broad variety of anions in their interiors and metal ions at their sulfur‐edged portals. The solid‐state structure of semithiobambus[4]uril with HgCl₂ demonstrates the ability of these compounds to form linear chains of coordination polymers with thiophillic metal ions. The crystal structure of semithiobambus[6]uril with tetraphenylphosphonium bromide exhibits the unique anion‐binding properties of the host cavity and the characteristics of the binding site.     

Redox Communication within Multinuclear Iron–Sulfur Complexes Related to Electronic Interplay in the Active Site of [FeFe]Hydrogenase

The one‐electron oxidations of a Fe₂ complex lead to the formation of a persistent metal‐stabilized thiyl radical Fe₂ species, mixed‐valent Fe₄, and Fe₈ complexes. The unpaired spin in the Fe₂ radical species delocalizes over the Fe₂ and the aromatic dithiolate, mostly on the terminal sulfur. The subsequent dimerization of the singly oxidized Fe₂ to the Fe₄ retains the partial thiyl radical character. For an analogue with less steric hindrance, the π–π stacking interaction between the dithiolato aromatic rings induces generation of the Fe₈, in which process electronic structures of the species are modulated through reducing the thiyl radical to the thiolate. Electronic reorganization repeats when the Fe₈ is converted to Fe₄. Electronic interplay in the complexes decreases the energy gap of frontier MOs and buffers electronic impacts upon redox events. Easier accessible redox potentials and increased stability of the species are facilitated. The results demonstrate that electronic versatility of the benzenedithiolate exerts pronounced influences on electronic and coordination structure of the metal complexes.     

Na2S–Carbon Nanotube Fabric Electrodes for Room‐Temperature Sodium–Sulfur Batteries

A unique sodium sulfide (Na₂S) cathode is developed, which will allow the use of sodium‐free anodes for room‐temperature sodium–sulfur (Na–S) batteries. To overcome the “inert” nature of the Na₂S, a special cathode structure is developed by spreading the multi‐walled carbon nanotube (MWCNT)‐wrapped Na₂S particles onto MWCNT fabrics. Spectroscopic and electrochemical analyses reveal a series of polysulfide intermediates involved in the charge/discharge of the cell. The Na–S battery prepared in full discharge state with the Na₂S/MWCNT cathode provides a remarkable capacity of 500 A h kg^?1 (based on sulfur mass) after 50 cycles.     

Carbon Materials for Lithium Sulfur Batteries—Ten Critical Questions

Lithium–sulfur batteries are among the most promising electrochemical energy storage devices of the near future. Especially the low price and abundant availability of sulfur as the cathode material and the high theoretical capacity in comparison to state‐of‐the art lithium‐ion technologies are attractive features. Despite significant research achievements that have been made over the last years, fundamental (electro‐) chemical questions still remain unanswered. This review addresses ten crucial questions associated with lithium–sulfur batteries and critically evaluates current research with respect to them. The sulfur–carbon composite cathode is a particular focus, but its complex interplay with other hardware components in the cell, such as the electrolyte and the anode, necessitates a critical discussion of other cell components. Modern in situ characterisation methods are ideally suited to illuminate the role of each component. This article does not pretend to summarise all recently published data, but instead is a critical overview over lithium–sulfur batteries based on recent research findings.     

Triphenylphosphine‐Mediated Deoxygenative Reduction of CF3SO2Na and Its Application for Trifluoromethylthiolation of Aryl Iodides

We report herein a practical method for taming Langlois’ reagent CF₃SO₂Na to generate CuSCF₃ by a triphenylphospine‐mediated deoxygenative reduction process. This chemistry highlights a novel utilization of the inherent CF₃S skeleton of Langlois’ reagent as a CF₃S feedstock under mild conditions. The CuSCF₃ intermediate generated by this protocol can react with a wide array of supporting ligands to furnish several air‐stable [LCu(SCF₃)] complexes as valuable trifluoromethylthiolating agents. In addition, the CuSCF₃ intermediate can be directly employed for the trifluoromethylthiolation of (hetero)aryl iodides with operational simplicity and atomic efficiency.